Sony HT-7000DH Operating Instructions Manual page 7

About the indicators on the display
S
m,
Name Function
[] SW
[] LFE
[] SP A/SP B
Lights up when tile audio signal
is output fionl the SUB
WOOFER jack.
Lights up when the disc being
played back contains an LFE
/Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
Lights up according to tile
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
[] rlrl DIGITAL
[] DrlPRO
LOGIC (11)
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you
h,ve made digital connections
and that INPUT MODE is not
set to "ANALOG" (page 64).
Lights up when tile receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals. "DO PRO
LOGIC II" lights up when tile
Pro Logic II Movie or Music
decoder is activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format
signals.
Name Function
[] DTS
Lights up when DTS sign_fls are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG" (page 64).
[] MEMORY
Lights up when a memory
function, such as Preset
Memory (page 55), etc., is
activated.
[] Preset
Lights up when using tile
station
receiver to tune in radio stations
indicators you h:we preset. For details on
presetting radio stations, see
page 55.
[] Tuner
Lights up when using tile
indicators
receiver to tune in radio stations
(page 53), etc.
[] D.RANGE
Lights up when dynamic range
compression is activated (page
40).
[] HDMI Flashes when you select
"HDMI A." in tile VIDEO
menu (page 65).
[] COAX
Lighls up when INPUT MODE
is set to "AUTO" and tile source
signal is a digital signal being
input through tile COAXIAL
jack, or when INPUT MODE is
set to "COAX IN" (page 64).
continued_
7us