Playback - Sony HT-7000DH Operating Instructions Manual

---2
7
Notes
• Refer to the operating
instructions supplied with tile
TV and DVD player.
• Check the following if you
cannot listen to multi channel
suund.
Be sure tile sU/uld su/lrce
correspunds to the multi
channel furmat/the MULTI
CHANNEL DECODING
lamp on the frunt panel lights
up during playback).
Be sure this receiver is
connected to the DVD player
via a digital connection.
Be sure the digital audiu
output of the DVD player is
set tip properly.
Tips
• Select the sound furmat uf the
disc to be played, if necessary.
• You can select the sound field to
suit the muvie/music. Refer tu
page 50 for details.
Recommeuded sound fields:
Movie: C.ST.EX
Music: CONCERT
MULTI CHANNEL DECODING lamp
7
3
1
Turn on the TV and DVD player.
2 Turn on the receiver.
3 Press DVD.
You can also use INPUT SELECTOR on this receiver to
select DVD.
4
Switch the input of the TV so that an image
of the DVD is displayed.
5 Set up the DVD player.
Refer to the operating instructions supplied with the DVD
player.
6 Playback the disc.
7 Adjust to a suitable volume.
8 After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.
38us