Download  Print this page

Advertisement

Table of Contents
2-662-265-11 (1)
DVD Home
Theatre System

Operating Instructions

Owner's Record
The model and serial numbers are located on the rear of the unit. Record the
serial number in the space provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Model No.
Serial No.
HT-7000DH
©2006 Sony Corporation

Advertisement

Table of Contents

   Related Manuals for Sony HT-7000DH

   Summary of Contents for Sony HT-7000DH

  • Page 1: Operating Instructions

    Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
  • Page 2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.
  • Page 3: About This Manual

    About This Manual • The instructions in this manual are for model HT-7000DH. The HT-7000DH consists of: • Receiver • DVD player • Speaker system – Front speaker – Center speaker – Surround speaker – Sub woofer • The instructions in this manual describe the controls on the supplied remote.
  • Page 4: Table Of Contents

    Table of Contents Getting Started Description and location of parts...5 1: Installing speakers ...14 2: Connecting speakers...16 3a: Connecting the audio components...18 3b: Connecting the video components ...21 4: Connecting the antennas...28 5: Preparing the receiver and the remote ...29 6: Selecting the speaker system ...30 7: Calibrating the appropriate settings automatically...
  • Page 5: Getting Started

    Getting Started Description and location of parts Receiver Front panel SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC VIDEO 3 IN/PORTABLE AV IN PHONES VIDEO L AUDIO R To remove the cover Press PUSH. When you remove the cover, keep it out of reach from children.
  • Page 6 Name Function E Remote sensor Receives signals from remote commander. F DISPLAY Press to select information displayed on the display (page 67). G INPUT MODE Press to select the input mode when the same components are connected to both digital and analog jacks (page 64).
  • Page 7 About the indicators on the display SP A DIGITAL SP B SLEEP OPT COAX SL S SR Name Function A SW Lights up when the audio signal is output from the SUB WOOFER jack. B LFE Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel...
  • Page 8 Name Function M OPT Lights up when INPUT MODE is set to “AUTO” and the source signal is a digital signal being input through the OPTICAL jack, or when INPUT MODE is set to “OPT IN” (page 64). N SLEEP Lights up when the sleep timer is activated (page 67).
  • Page 9: Rear Panel

    Rear panel DIGITAL DVD IN VIDEO 2 IN OPTICAL VIDEO 1 ANTENNA ASSIGNABLE VIDEO 2 HDMI VIDEO IN COAXIAL AUDIO IN SA-CD/CD MD/TAPE A DIGITAL INPUT section OPTICAL Connects to a DVD IN jack player, etc. The COAXIAL jack provides a better COAXIAL IN quality of loud jack...
  • Page 10 You can use the supplied remote RM-AAP012 deck or CD player, etc. (page 20). to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate. You can also program the Connects to a...
  • Page 11 Name Function B ?/1 Press to turn the receiver on or off. To turn off all components, press ?/1 and AV ?/1 (A) at the same time (SYSTEM STANDBY). SLEEP Press ALT (G) and then press SLEEP to activate the Sleep Timer function and the duration which the receiver turns off automatically.
  • Page 12 Name Function V AV MENU Press to display the menus of the VCR, DVD player, satellite tuner, Blu-ray disc recorder, hard disc recorder, or PSX on the TV screen. Then, use the control buttons to perform menu operations. Press to start playback of the VCR, CD player, VCD player, LD player, DVD player, MD deck, DAT deck, tape deck, Blu-...
  • Page 13 When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components as follows. You can program the remote to control non-Sony components following the steps in “Programming the remote”...
  • Page 14: 1: Installing Speakers

    1: Installing speakers To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel). Example of a 5.1 channel speaker system configuration AFront speaker (L) BFront speaker (R) CCenter speaker DSurround speaker (L)
  • Page 15 • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.
  • Page 16: 2: Connecting Speakers

    2: Connecting speakers DVD IN VIDEO 2 IN MONITOR OUT ASSIGNABLE HDMI MONITOR VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT AUDIO IN AUDIO IN AUDIO OUT AUDIO IN FRONT MD/TAPE VIDEO 2 VIDEO 1 A Monaural audio cord (supplied) B Speaker cords (supplied) AFront speaker A (L) BFront speaker A (R)
  • Page 17 To connect the speakers correctly Check the speaker type by referring to the speaker label* on the rear panel of the speakers. Character on Speaker type speaker label Front left Front right Surround left Surround right * The center speaker and sub woofer do not have any character on the speaker label.
  • Page 18: 3a: Connecting The Audio Components

    3a: Connecting the audio components How to hook up your components This section describes how to hook up your components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect each component.
  • Page 19 Connecting components with multi channel output jacks If your DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect it to the MULTI CH IN jacks of this receiver to enjoy multi channel sound. Alternatively, the multi channel input jacks can be used to connect an external multi channel decoder.
  • Page 20: Connecting Components With Analog Audio Jacks

    Connecting components with analog audio jacks The following illustration shows how to connect a component which has analog jacks such as tape deck, etc. Super Audio CD player/ CD player DIGITAL OPTICAL VIDEO 1 ANTENNA VIDEO 2 COAXIAL A Audio cord (not supplied) MD deck/ Tape deck DVD IN...
  • Page 21: 3b: Connecting The Video Components

    3b: Connecting the video components How to hook up your components This section describes how to hook up your components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect each component.
  • Page 22: Tv Monitor

    Hooking up a TV monitor The image from a visual component connected to this receiver can be displayed on a TV screen. It is not necessary to connect all the cables. Connect video cords according to the jacks of your components. You can watch the selected input image when you connect the MONITOR OUT jack to a TV monitor.
  • Page 23: Dvd Player/dvd Recorder

    Hooking up a DVD player/DVD recorder The following illustration shows how to connect a DVD player/DVD recorder. It is not necessary to connect all the cables. Connect audio and video cords according to the jacks of your components. 1 Connecting audio DVD player DIGITAL OPTICAL...
  • Page 24: Connecting Video

    2 Connecting video DIGITAL OPTICAL VIDEO 1 ANTENNA VIDEO 2 COAXIAL SA-CD/CD A Video cord (not supplied) B Component video cord (not supplied) If you connect a DVD recorder • Be sure to change the factory setting of the VIDEO 1 input button on the remote so that you can use the button to control your DVD recorder.
  • Page 25 VIDEO 2 COAXIAL SA-CD/CD A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. Notes on HDMI connections • The multi/stereo area audio signals of a Super Audio CD are not output. • Turn on the receiver when the video and audio of a playback component are being output to a TV via the receiver.
  • Page 26: Satellite Tuner

    Hooking up a satellite tuner The following illustration shows how to connect a satellite tuner. It is not necessary to connect all the cables. Connect audio and video cords according to the jacks of your components. DIGITAL OPTICAL ANTENNA VIDEO 1 VIDEO 2 COAXIAL A Audio cord (not supplied)
  • Page 27: Vcr

    Hooking up components with analog video and audio jack The following illustration shows how to connect a component which has analog jacks such as a VCR, etc. DIGITAL OPTICAL VIDEO 1 ANTENNA VIDEO 2 COAXIAL SA-CD/CD MD/TAPE To the VIDEO 3 IN/PORTABLE AV IN jacks Camcorder/ video game A Audio/video cord (not supplied)
  • Page 28: 4: Connecting The Antennas

    4: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. FM wire antenna (supplied) DIGITAL OPTICAL VIDEO 1 ANTENNA VIDEO 2 COAXIAL SA-CD/CD * The shape of the connector varies depending on the area code of this receiver. Notes •...
  • Page 29: 5: Preparing The Receiver And The Remote

    5: Preparing the receiver and the remote Connecting the AC power cord Connect the AC power cord to a wall outlet. AC power cord – FRONT A FRONT B SPEAKERS To the wall outlet Note Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.
  • Page 30: 6: Selecting The Speaker System

    Inserting batteries into the remote Insert two R6 (size-AA) batteries in the RM-AAP012 remote commander. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones. •...
  • Page 31: 7: Calibrating The Appropriate Settings Automatically (auto Calibration)

    7: Calibrating the appropriate settings automatically (AUTO CALIBRATION) This receiver is equipped with D.C.A.C. (Digital Cinema Auto Calibration) Technology which allows you to perform automatic calibration as follows: • Check the connection between each speaker and the receiver. • Adjust the speaker level. •...
  • Page 32: Error Codes

    The table below shows the display when measurement starts. Measurement for Display Environment noise level NOISE.CHK Speaker connection MEASURE and SP DET. appears alternately* Speaker level MEASURE and GAIN appears alternately* Speaker distance MEASURE and DISTANCE appears alternately* * The corresponding speaker indicator lights up in the display during measurement.
  • Page 33 Warning codes During Auto Calibration, the warning code provides information on the measurement result. The warning code will appear on the display cyclically as follows: Warning code t blank display t (warning code t blank display) t PUSH t blank display t ENTER Appears when there are more than one warning code.
  • Page 34: 8: Adjusting The Speaker Levels And Balance (test Tone)

    8: Adjusting the speaker levels and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. The receiver employs a test tone with a frequency centered at 800 Hz. MUTING TOP MENU/ GUIDE...
  • Page 35: Playback

    Playback Selecting a component SYSTEM STANDBY SLEEP VIDEO1 VIDEO2 VIDEO3 MD/TAPE SA-CD/CD TUNER MULTI CH A.F.D. MOVIE MUSIC DUAL CATEGORY CATEGORY MONO MODE AUDIO ANGLE JUMP/ PRESET/ TUNING TIME CH/D.SKIP MEMORY SUBTITLE ENTER > 0/10 >10/11 D.TUNING DISC CLEAR SEARCH MODE TOP MENU/ MUTING GUIDE...
  • Page 36 To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. To listen to the sub woofer Be sure to use the buttons on the rear panel of the sub woofer for this operation. Press POWER.
  • Page 37: Listening/watching A Component

    VIDEO MENU AUTO WIDE Notes • The operation is described for a Sony Super Audio CD player. • Refer to the operating instructions supplied with the Super Audio CD player or CD player. Tips • You can select the sound field to suit the music.
  • Page 38: Watching A Dvd

    Watching a DVD TV ?/1 AV ?/1 RM SET UP SYSTEM STANDBY SLEEP VIDEO1 VIDEO2 VIDEO3 MD/TAPE SA-CD/CD TUNER MULTI CH A.F.D. MOVIE MUSIC DUAL CATEGORY CATEGORY MONO MODE AUDIO ANGLE JUMP/ PRESET/ TUNING TIME CH/D.SKIP MEMORY SUBTITLE ENTER > 0/10 >10/11 D.TUNING...
  • Page 39: Amplifier Operations

    Amplifier Operations Navigating through menus By using the amplifier menus, you can make various adjustments to customize the receiver. TOP MENU/ MUTING GUIDE AV MENU MASTER DISPLAY RETURN/EXIT TV VOL TV CH VIDEO MENU AUTO WIDE Press AMP MENU. “1-LEVEL” appears on the display. Press control button V/v repeatedly to select the menu you want.
  • Page 40: Overview Of The Menus

    Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 39. Menu Parameters [Display] [Display] LEVEL (42) Test tone [1-LEVEL] Front speaker balance [FRT BAL] Center speaker level [CNT LVL] Surround left speaker level [SL LVL] Surround right speaker level...
  • Page 41 Menu Parameters [Display] [Display] AUDIO (44) Digital audio input decoding [5-AUDIO] priority [DEC. PRI.] Digital broadcast language selection [DUAL] A/V Sync [A.V. SYNC.] Naming inputs VIDEO (45) Component video assign [6-VIDEO] [COMP. V. A.] HDMI assign [HDMI A.] Naming inputs SYSTEM (46) Front speaker distance [7-SYSTEM]...
  • Page 42: Adjusting The Level (level Menu)

    Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. These settings are applied to all sound fields. Select “1-LEVEL” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus”...
  • Page 43: Adjusting The Tone (tone Menu)

    Adjusting the tone (TONE menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front speakers. These settings are applied to all sound fields. Select “2-TONE” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus”...
  • Page 44: Settings For The Tuner (tuner Menu)

    Settings for the tuner (TUNER menu) You can use the TUNER menu to set the FM station receiving mode and to name preset stations. Select “4-TUNER” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 39) and “Overview of the menus”...
  • Page 45: Settings For The Video (video Menu)

    x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. • DUAL M/S (Main/Sub) Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously.
  • Page 46: Settings For The System (system Menu)

    Settings for the system (SYSTEM menu) You can use the SYSTEM menu to set the size and distance of the speakers connected to this system. Select “7-SYSTEM” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 39) and “Overview of the menus”...
  • Page 47: Surround Speaker Position

    x SUR POS. (Surround speaker position) Lets you specify the location of your surround speakers for proper implementation of the surround effects in the Cinema Studio EX modes (page 51). • SIDE/LO Select if the location of your surround speakers corresponds to sections A and C. •...
  • Page 48: Calibrating The Appropriate Settings Automatically (a. Cal Menu)

    Calibrating the appropriate settings automatically (A. CAL menu) For details, see “7: Calibrating the appropriate settings automatically (AUTO CALIBRATION)” (page 31). Enjoying Surround Sound Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT) The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound.
  • Page 49 Types of A.F.D. mode Decoding A.F.D. mode mode [Display] (Detecting A.F.D. AUTO automatically) [A.F.D. AUTO] Dolby Pro Logic PRO LOGIC [DOLBY PL] Dolby Pro Logic PRO LOGIC II MOVIE [PLII MV] PRO LOGIC II MUSIC [PLII MS] (Multi Stereo) MULTI STEREO [MULTI ST.] Notes •...
  • Page 50: Selecting A Pre-programmed Sound Field

    Selecting a pre- programmed sound field You can take advantage of surround sound simply by selecting one of the receiver’s pre- programmed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. MULTI CH A.F.D.
  • Page 51 Effect Reproduces the sound characteristics of the Sony Pictures Entertainment “Cary Grant Theater” cinema production studio. This is a standard mode, great for watching almost any type of movie.
  • Page 52: Using Only The Front Speakers And Sub Woofer (2ch Stereo)

    CINEMA STUDIO EX modes are suitable for watching motion picture DVDs (etc.), with multi channel surround effects. You can reproduce the sound characteristics of Sony Pictures Entertainment’s dubbing studio in your home. The CINEMA STUDIO EX modes consist of the following three elements.
  • Page 53: Resetting Sound Fields To The Initial Settings

    Resetting sound fields to the initial settings Be sure to use the buttons on the receiver for this operation. MULTI CHANNEL DECODING SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC MEMORY/ TUNING ENTER MODE TUNING A.F.D. MOVIE MUSIC VIDEO 3 IN/PORTABLE AV IN PHONES VIDEO L AUDIO R...
  • Page 54: Automatic Tuning

    Automatic tuning VIDEO1 VIDEO2 VIDEO3 MD/TAPE SA-CD/CD TUNER MULTI CH A.F.D. MOVIE MUSIC DUAL CATEGORY CATEGORY MONO MODE JUMP/ PRESET/ AUDIO ANGLE TIME CH/D.SKIP TUNING MEMORY SUBTITLE ENTER > Press TUNER repeatedly to select the FM or AM band. Press TUNING + or TUNING –. Press TUNING + to scan from low to high;...
  • Page 55: Presetting Radio Stations

    Presetting radio stations You can preset up to 30 FM stations and 30 AM stations. Then you can easily tune in the stations you often listen to. Presetting radio stations MD/TAPE SA-CD/CD TUNER MULTI CH A.F.D. MOVIE MUSIC DUAL CATEGORY CATEGORY MONO MODE...
  • Page 56: Tuning To Preset Stations

    Tuning to preset stations MD/TAPE SA-CD/CD TUNER A.F.D. MOVIE DUAL CATEGORY MONO Numeric AUDIO ANGLE JUMP/ buttons TUNING TIME MEMORY SUBTITLE ENTER > 0/10 >10/11 D.TUNING DISC CLEAR SEARCH MODE Press TUNER repeatedly to select the FM or AM band. Press PRESET + or PRESET –...
  • Page 57: Listening To The Xm Radio

    Press control button V/v repeatedly to select “NAME IN”. Press the control button or control button b to enter the parameter. The cursor flashes and you can select a character. Follow the procedure given in “To create an index name” below. To return to the previous display Press control button B.
  • Page 58: Select Channel

    Note To ensure optimal reception of XM’s satellite signal, move your antenna to various window locations around your home to see where the best reception will be received. Most XM customers place the antenna in a south-facing window with a clear view to the sky.
  • Page 59: Display Description

    Display Description 2 (two) 5 (five) 6 (six) 8 (eight) 0 (zero) Receiving XM Radio broadcasts VIDEO1 VIDEO2 VIDEO3 MD/TAPE SA-CD/CD TUNER MULTI CH A.F.D. MOVIE MUSIC DUAL CATEGORY MONO CATEGORY MODE AUDIO JUMP/ PRESET/ ANGLE TUNING TIME CH/D.SKIP MEMORY SUBTITLE ENTER >...
  • Page 60: Select The Channel

    Selecting channels from a category (CATEGORY TUNING) You can select a channel from one category or all the categories by changing the category mode. MD/TAPE SA-CD/CD TUNER MULTI CH A.F.D. MOVIE MUSIC DUAL CATEGORY MONO CATEGORY MODE AUDIO ANGLE JUMP/ PRESET/ TIME CH/D.SKIP...
  • Page 61: Presetting Xm Radio Stations

    Displaying the XM-RADIO information on the front panel display DISPLAY MULTI CHANNEL DECODING SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC MEMORY/ TUNING ENTER MODE TUNING A.F.D. MOVIE MUSIC VIDEO 3 IN/PORTABLE AV IN PHONES VIDEO L AUDIO R Press DISPLAY on the receiver repeatedly.
  • Page 62 Press ALT and then press the numeric buttons to enter the preset number. You can also select the number by pressing PRESET + or PRESET –. You can also turn TUNING +/– on the receiver. Preset numbers from 1 to 30 are available, and channel 1 is preset for all the preset numbers when you purchase the receiver.
  • Page 63 XM Radio messages list Message Explanation appears ANTENNA The XM antenna is not connected or transmission is not being received properly. UPDATING The encryption code is being updated. NO SIGNL The signal is too weak. LOADING The audio channel or information is being acquired.
  • Page 64: Other Operations

    Other Operations Switching the audio input mode (INPUT MODE) You can select the audio input mode by setting the audio input mode when you connect components to both digital and analog audio input jacks on the receiver. Turn INPUT SELECTOR on the receiver to select the input.
  • Page 65: Watching Hdmi Images From Other

    Press control button V/v repeatedly to select the input you want the component video input selected in step 6 to be reassigned to (for example, VIDEO 1). In this case, select “DVD–VD1”. When you press VIDEO 1, the image from the component connected to the VIDEO 1 jacks will be a component image.
  • Page 66: Naming Inputs

    Press control button V/v repeatedly to select the input you want the HDMI input selected in step 6 to be reassigned to (for example, VIDEO 1). In this case, select “DVD–VD1”. When you press VIDEO 1, the image from the component connected to the VIDEO 1 jacks will be a HDMI image.
  • Page 67: Changing The Display

    Changing the display You can check the sound field, etc., by changing the information on the display. Be sure to use the buttons on the receiver for this operation. Press DISPLAY repeatedly. Each time you press the button, the display changes cyclically as follows.
  • Page 68: Recording Using The Receiver

    Recording using the receiver Recording onto a MiniDisc or audio tape You can record onto a MiniDisc or audio tape using the receiver. See the operating instructions supplied with your MD deck or tape deck. Press one of the input buttons to select the playback component.
  • Page 69: Using The Remote

    Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals.
  • Page 70 Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the...
  • Page 71 TELEFUNKEN 751, 752 TOSHIBA 747, 755, 756 ZENITH * If an AIWA VCR does not work even though you enter the code for AIWA, enter the code for Sony instead. To control a DVD player Maker Code(s) SONY 401, 402, 403...
  • Page 72: Additional Information

    To control a tuner Maker Code(s) SONY 002, 003, 004, 005 To control a hard disc recorder Maker Code(s) SONY 307, 308, 309 To control a blu-ray disc recorder Maker Code(s) SONY 310, 311, 312 To control a PSX Maker...
  • Page 73: Precautions

    x Dolby Surround (Dolby Pro Logic) Audio processing technology developed by Dolby Laboratories, Inc. Center and mono surround information is matrixed into two stereo channels. When reproduced, audio is decoded and output in 4ch surround sound. This is the most common audio processing method for DVD-video.
  • Page 74 Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer.
  • Page 75: Troubleshooting

    Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. There is no sound, no matter which component is selected, or only a very low-level sound is heard. •...
  • Page 76 The source sound input to the HDMI jack on the receiver is not output from the TV speaker. • Check the HDMI connection. • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback component, you may need to set up the component.
  • Page 77: Remote Control

    Radio stations cannot be tuned in. • Check that the antennas are connected securely. Adjust the antennas and connect an external antenna, if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning. •...
  • Page 78: Specifications

    If the problem persist Consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Reference sections for clearing the receiver’s memory...
  • Page 79 Inputs (Digital) DVD (Coaxial) Sensitivity: – Impedance: 75 ohms VIDEO 1, 2 Sensitivity: – (Optical) Impedance: – Outputs (Analog) MD/TAPE (OUT), Voltage: 800 mV VIDEO 1 (AUDIO Impedance: 10 kohms OUT) SUB WOOFER Voltage: 2 V Impedance: 1 kohm Reproduction frequency range: 28 –...
  • Page 80 Speaker section • Front speakers (SS-MSP7000) • Center speaker (SS-CNP900) • Surround speakers (SS-SRP7000) Front speakers 2 way, magnetically shielded Center speaker Full range, magnetically shielded Surround speakers Full range Speaker units Front speakers Tweeter: 40 mm cone type Woofer: 80 mm cone type Center/surround speakers 80 mm cone type Enclosure type...
  • Page 81 Supplied accessories FM wire antenna (1) AM loop antenna (1) Monaural audio cord (1) Speaker cords • Long (2) • Short (3) Coaxial digital cord (1) Footpads • Speakers (20) • Sub woofer (4) Remote commander RM-AAP012 (1) R6 (size-AA) batteries (2) Optimizer microphone ECM-AC2 (1) Speakers •...
  • Page 82: Index

    Index Numerics 2 channel 52 2CH STEREO 52 5.1 channel 14 AUTO CALIBRATION 31 AUTO FORMAT DIRECT (A.F.D.) 48 CD player connecting 18 playback 37 COMPONENT VIDEO ASSIGN 64 Digital Cinema Sound (DCS) 51 Dolby Digital 72 DTS 73 DVD player hooking up 21 playback 38 DVD recorder...
  • Page 84 Sony Corporation Printed in Malaysia...

This manual is also suitable for:

Str-k7000

Comments to this Manuals

Symbols: 0
Latest comments: