Sony HT-7000DH Operating Instructions Manual page 15

You can install your surround speakers on the
wall.
1
Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker as
shown in the illustrations
below.
more than 4 mm
(5/32 inch)
I, ,I
more than 25 mm (1 inch)
3 Hang the speakers on the
screws.
Hook on the back of the speaker
.=
2
Hook on the back of the speaker
Fasten the screws to the wall.
The screws should protrude 5
to 7 ram.
Notes
• Use scre'_x s that are suitable for tile "_x all material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinlk_rcement is
applied.
• Contact a screw shop or installer regarding the wall
material ur scre_ s to be used.
• Sony is not responsible for accident or damage
caused by impruper installation, iusuftScient wall
strength or impruper screw installation, natural
calamity, etc.
15us