3A: Connecting The Audiocomponents - Sony HT-7000DH Operating Instructions Manual

3a: Connecting the audiocomponents
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
each component.
After hooking up all your components,
proceed to "4: Connecting the antennas" (page
28).
Component to be connected
Component With Page
Super Audio Multi-channel audio 19
CD player/CD output a/
player Analog audio output 2(1
only b)
MD deck_ape Analog audio output 20
deck only bl
a)Model with MULTI CH OUTPUT jacks, etc. This
connection is used to output audio decoded by the
component's internal multi-channel decoder
thruugh this receiver.
b)Model equipped only with AUDIO OUT L/R
jacks, etc.
The sound quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks of
your components.
Digital
Analog
g
@L
@o
AUDIO IN
High
quality
sound
18us