Andtheremote - Sony HT-7000DH Operating Instructions Manual
Hide thumbs
Also See for HT-7000DH:
- Operating instructions manual (84 pages) ,
- Operating instructions (2 pages) ,
- Connection manual (1 page)
Table of Contents
Advertisement
5: Preparingthereceiver
andtheremote
Connect
the AC power cord to a wall outlet.
AC power cord
To the wall outlet
Note
Install this s}'stem
so that tile power
cord can be
unplugged from tilewall socket immediately in the
event of trouble.
Before using the receiver for the first time,
=.
initialize the receiver by performing the
,e,
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults,
o.
Be sure to use the buttons on the receiver for
this operation.
1,2
1
2
3
3
Press I/(_ to turn off the
receiver.
Hold down I/_ for 5 seconds.
"PUSH" and "ENTER" appears on the
display alternately.
Press MEMORWENTER.
After "CLEARINC," appears on the
display for a while, "CLEARED"
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO, VIDEO and
SYSTEM menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME is set to "VOL
MIN".
• Input is set to "DVD".
29us
- Quick Links:
- 3A: Connecting the Audiocomponents
Hide quick links:
Advertisement
Table of Contents
