Sony HANDYCAM DCR-TRV330 Operating Instructions Manual page 67

Dubbing only desired scenes - Digital program editing
(4) Confirming VCR operation
(_) Insert a recordable tape into the VCR, then set to recording pause.
(_ Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial.
(_ Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
If the VCR starts recording, the setting is correct.
When finished, the indicator on the screen changes to COMPLETE.
3
CONTROL
_ COMPLETE _,_,_ "CUT O_T"
[g'EHU] E D
When the VCR does not operate correctly
• After checking the code in "About the IR SETUP code", set the IR SETUP or the
PAUSEMODE again.
• Place your camcorder at least 30 cm (11 7/8 in.) away from the VCR.
• Refer to the operating instructions of your VCR.
67