Sony HANDYCAM DCR-TRV330 Operating Instructions Manual page 36

Using the wide mode
You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9WIDE).
Black bands appear on the LCD screen or in the viewfinder during recording in 16:9
WIDE mode [a]. The picture during playing back on a normal TV [b] or a wide-screen
TV [c] are compressed in the widthwise direction. If you set the screen mode of the
wide-screen TV to the full mode, you can watch pictures of normal images [d].
[a]
[c]
[d]
) @
36
In the standby mode set 16:9WIDE to ON in the menu settings (p. 79).
MENU
To cancel the wide mode
Set 16:gWIDE to OFF in the menu s_,ttings.
In the wide mode, you cannot select the following functions:
- Old movie
Bounc_ z
During recording
You cannot select or cancel the wide mode. When you cancel the wide mode, set your
camcorder to the standby mode and then set 16:9V_TIDE to OFF in the menu settir_%
Connection for a TV
Pictures recorded in the 16:9WIDE mode automatically appear on the TV screen at full
size when:
you connect your camcorder to a TV that is compatible with the video ID (ID-1/ID-2)
system.
you connect your camcorder to the S video jack on the TV.
ID-1 system
The ID-1 system sends aspect ratio information (16:9, 4:3, or letter box) with video
signals. If you connect a TV compatible with the ID-1 system, the screen size is
automatically selected.
ID-2 system
The ID-2 system sends a copyright protection signal with ID-1 signals inserted betw_,en
video signals when you connect vour camcorder to other equipment by an A/V
connecting cable.
If the wide mode is set to ON
The SteadyShot function does not work. If you set 16:qWIDE to ON in the m_nu s_4tings
when the SteadyShot function is working, '_" flashes and the SteadvShot function does
not function.