Sony HANDYCAM DCR-TRV330 Operating Instructions Manual page 59

Searching for a photo - Photo search/Photo scan
(1) Set the POWER switch to VCR.
(2) Press SEARCH
MODE on the Remote Commander repeatedly, until the photo
scan indicator appears on the screen.
The indicator changes as follows:
DATE SEARCH ---* PHOTO SEARCH ---* PHOTO SCAN ---* (no indicator)
t I
(3) Press 144 or _)-I.
Each photo is played back for about 5 seconds automatically.
>
o
0
To stop scanning
Press == .
Note
The photo search and photo scan work only for tapes recorded in the Digital8 |) system.
If a tape has a blank portion in the recorded portions
The photo search and photo scan functions may not work correctly.
59