Sony HANDYCAM DCR-TRV330 Operating Instructions Manual page 56

Quickly locating a scene using the zero
set memory function
Your canrcorder goes forward or backward to automatically stop at a desired scene
having a counter value of "0:00:00".
Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you want to locate later. The counter
shows "0:00:00" and the ZERO SET MEMORY indicator flashes on the screen.
(3) Press • when you want to stop playback.
(4) Press _1_ to rewind the tape to the counter's zero point. The tape stops
automatically when the counter reaches approximately zero. The ZERO SET
MEMORY indicator disappears and the time code appears.
(5) Press _. Playback starts from the counter's zero point.
DISPLAY ZERO SET
MEMORY
Notes
• The zero set memory function works only for tapes recorded in the Digital8 [3 system.
• When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
function is canceled.
• There mav be a discrepancy of several seconds from the time code.
If a tape has a blank portion in the recorded portions
The zoro set momory function may not work correctly.
56