Sony HANDYCAM DCR-TRV330 Operating Instructions Manual page 152

Identifying the parts and controls
The buttons that have the same name on the Remote Commander as on your camcorder
function identicallv to the buttons on your camcorder.
%
%
[]
[]
[]
[]
[]
PHOTO button (p. 33, 93)
[] DISPLAY button (p. 28)
[] SEARCHMODE button (p. 57, 58)
[] 1_141/1_1 buttons (p. 57, 58)
[] Tape transport buttons (p. 29)
[] Transmitter
Point toward the remote sensor to
control the calncorder after turning on
the camcorder.
[] ZERO SET MEMORY button (p. 52, 56)
[] START/STOP button (p. 19)
[] DATA CODE button (p. 28)
[] Power zoom button (p. 21)
To prepare the Remote Commander
Insert 2 size AA (R6) batteries by matching the + and - polarities on the batteries to
the + marks inside the battery compartment.
152
Notes on the Remote Commander
• Point the remote sensor away front strong light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote Commander nray not function properly.
• Your camcorder works in the Commander nrode VTR 2. Comnrander modes
1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid
remote control misoperation. If you use another Sony VCR in the Conmrander mode
VTR 2, we recommend changing the Commander mode or covering the sensor of the
VCR with black paper.