Sony HANDYCAM DCR-TRV330 Operating Instructions Manual page 112

Viewing images using your computer
For Windows 98 users
(1) Turn
on the power of your computer and allow Windows 98 to load.
(2) Connect one end of the USB cable to the _ (USB) jack on the camcorder and the
other end to the USB com_ector on your computer.
(3) Insert a "Memory Stick" into your camcorder, and connect the AC power
adaptor to your camcorder and then to a wall outlet.
(4) Set the POWER switch to MEMORY.
"PC MODE" appears on the screen of your camcorder.
(5) Open "My Computer" on Windows 98 and double click the newly recognized
drive. (Example: "Removable Disk (D:)')
The folders inside the "Memory Stick" are displayed.
(6) Select and double-click the desired image file from the folder. Double-click the
folder or the file in the following order.
"Dcim" folder _ "100msdcf" folder ---* hnage file
For the detailed folder and file name, see "hnage file storage destinations and
image files" (p. 113).
(USB)jack
Push in until
the connector
clicks into place
USB cable
USB connector
To unplug the USB cable or eject the "Memory Stick", follow the procedure below.
For Windows 2000 users
(1) Move the cursor to the "Unplug or Eject Hardware" icon on the TaskTray and
click to cancel the applicable drive.
(2) A message to remove the device from the system appears, then unplug the
USB cable or eject the "Memory Stick."
For Macintosh users
(1) Quit application
programs opened.
Make sure that the access lamp of the hard disk does not lit.
(2) Drag and drop the "Memory Stick" icon to the Trash or select Eject under the
Special menu.
(3) Eject the "Memory Stick."
112