Sony HANDYCAM DCR-TRV330 Operating Instructions Manual page 12

Step 1 Preparing the power supply
Use the battery pack after charging it for your canrcorder.
Your camcorder operates only with the "InfoLITHIUM" battery pack (M series).
See page 135 for details of "InfoLITHIUM" battery pack.
(1) Open the DC IN jack cover and COlmect the AC power adaptor supplied with
your camcorder to the DC IN jack with the plug's • mark facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF (CHG). Charging begins. The remaining battery
time is indicated in minutes on the display window.
When the remaining battery indicator changes to _, normal charge is conrpleted. To
fully charge the battery (full charge), leave the battery pack attached after normal
charge is completed until FULL appears on the display window. Fully charging the
battery allows vou to use the battery longer than usual.
I FoLL
I OOm,A
The number in tire illustration of tire display window may differ from that on )Tour
camcordor.
After charging the battery pack
Disconnect the AC power adaptor from tire DC IN jack on },our camcorder.
12