To Star,Stop Recording In Sync With The Sound Source; (Synchro-Mcording) - Sony Walkman MZ-NF610 Operating Instructions Manual

On the remote control
1
Press DISPLAY.
Each time you press the butlon, lhe
display changes as follows:
Display window on the remote control
Display: _/O
O O
Track number Elapsed time
Track number Track name
The number of Group name
the track in the
group
The number of Disc name
tracks in the disc
Track number The name of the
sound mode
Note
Depending on whether tile group function is
used or noL tile operating conditions, and the
disc settings,
you may not be _ble to select
certain indications or tile indications may
appeardifferent.
"8"
For more details about file indic_lions in tile
display while playing, see "Viewing various
information" (p_ge 36).
To startlstop recording
in sync with the sound
source
(Synchro-recording)
During synchm-recording, the recorder
starts and stops recording in sync with the
sound source. When recording from
digital equipment (such as a CD player),
you can omit operating both the recorder
and the sound source, and easily make
digital recording. You can make synchro-
recording only when the optical cable is
connected.
MEN
REC • T MARK
4-way controlkey
(ENTER • I_, t<<, IHH, II)
1
2
3
4
5
Make connections.
Use the appropriate optical cable to
suit the source equipment. Connect
the cable firmly to the appropriate
jacks.
While the recorder is stopped, press
MENU.
Press _ or _ repeatedly until
"R-SET" appears in the display, and
then press ENTER.
Press _ or _ repeatedly until
"SYNC-R" appears in the display,
and then press ENTER.
Press _ or _ repeatedly until
"ON" appears in the display, and then
press ENTER.
30