Sony Handycam DCR-SR67 Operating Manual page 25

Preparing a computer
(Windows)
You can perform fbllowing operations using
"PMB (Picture Motion Browser)."
-hnporting images to a computer
-Viewing and editing imported images
- Creating a disc
-Uploading movies and photos to websites
To saw, movies and photos using a
computer, install "PMB" from the supplied
CD-ROM beforehand.
• Do not format the hard disk of your camcorder
from a computer. _\mr camcorder may not
operate correctl)_
• 5_u can create discs using 12 cm discs of
fbllowing type with "PMB2
- DVD-R/DVD+R/DVD+R DL:
Unrewritable
- DVD-RW/DVD+RW:
Rewritable
Microsoft Windows XP SP3_x/Windows Vista
SPI-×3
Intel Pentium III: 1 GHz or faster
DirectX 9.0c or later
(This product is based on DirectX
technology. It is necessary to have DirectX
installed.)
256 MB or more
Other system requirements for OS should
be met.
Disk volume required for installation:
Approximately 500 MB (5 GB or more may
be necessary when creating DVD discs.
installation)
Operation with all computer environments is
not assured.
< Standard installation is required. Operation is
not assured if the OS has been upgraded or in a
nmlti boot environment.
.×264-bit editions and Starter (Edition) are not
supported.
×' Starter (Edition) is not supported.
When using a Macintosh
The supplied software "PMB" is not
supported by Macintosh computers.
To process photos using a Macintosh
computer connected to your camcorder.
see the following website.
http:!/guide.d-imaging.sony.co.jp/mac/
msms
Install "PMB" before connecting your
camcorder to a computer.
• If a version of"PMB" supplied with another
device has already been installed on the
computer, check the version. (The version
nmnber is displayed by clicking [Help] [About
PMB].) Compare the version number of the
supplied CD ROM with that of the previously
installed "PMB;' check to ensure that the
versions have been installed in order, fl'om the
lower to the higher. If the version nmnber of
the previously installed "PMB" is higher than
that of the "PMB" of your camcorder, uninstall
"PMB" ficom the computer and then reqnstall
it in order, ficom lower to higher. If you install a
<.
o_
o
g
3
"D
_5