Sony Handycam DCR-SR67 Operating Manual page 13

Step 1" Charging the battery pack
CHG (char
ACCESS lamp (Hard disk)
3
DC plug
DC IN jack
Battery pack
AC Adaptor
Power cord (Mains lead)
"Ibthe wall outlet
(wall socket)
You can charge the "Infi_LITHIUM" battery pack (H series) after attaching it to your
camcorder.
• 5_u cannot attach any "InfbLITHIUM" battery pack other than the H series to your camcorder.
Turn offyour camcorder by closing the LCDscreen.
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Be surethat the • mark o17 the D(" plug is
facing
down.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is full}, charged.
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
63
• See page 52 on charging, recording and playing time.
_3