Snapper 2690980 Operator's Manual page 24

CheckSparkPmug G ap
Usea sparkplugfeelergauge tocheckthegapbetween t he
twoelectrodes. Whenthegapiscorrect, t hegauge wifldrag
s_ighfly asyoupuWl itthrough thegap.
If necessary, usethesparkpluggauge toadjust t hegapby
gently bending thecurved electrode w ithout t ouching the
center e lectrode ortheporcelain.
.030-
(0.76 ram)
mnstaH Spark Plug
Finger tighten, then tighten with wrench.
, 180 inqbs (20 Nm), OR
o 1/2 turn when reinstalling the original spark plug.
1/4 turn when instaflJng a new spark plug.
Figure 13
24 www.snapper.com