Maytag MER5875RAF - Frost 30 Inch Electric Range Use And Care Manual page 27

Precision touch control 800 electric smoothtop
Hide thumbs Also See for MER5875RAF - Frost 30 Inch Electric Range:
Table of Contents

Advertisement

Available languages

Available languages

PROBLEM
SDLUTmDN
Smoothtop
surface
shows
wear.
Moisture
collects on oven
window
or steam comes from
oven
vent.
There is a strong odor or light
smoke when oven is turned on.
Fault Codes
Noises may be heard.
There are no beeps and
SAb flashing and then
Tiny scratches or abrasions.
- Make sure cooktop
and pan bottom are clean. Do not slide glass or metal pans
across top. Make sure pan bottom is not rough. Use the recommended
cleaning agents. See page 21.
,
Metal marks.
- Do not slide metal pans across top. When cool, clean with Cooktop
Cleaning
Creme. See page 21.
° Brown streaks and specks.
- Remove spills promptly.
Never wipe with a soiled cloth or sponge. Make sure
cooktop and pan bottom are clean.
° Areas with a metallic sheen.
- Mineral
deposits from water and food. Use recommended
cleaning
agents.
See page 21.
° Pitting or flaking.
- Remove sugary boilovers promptly.
See page 21.
° This is normal when cooking foods high in moisture.
, Excessive moisture was used when cleaning the window.
This is normal for a new range and wiii disappear after a few uses. Initiating a clean
cycle wiii "burn off" the odors more quickly.
, Turning on a ventilation fan wiii help remove the smoke and/or odor.
, Excessive food soils on the oven bottom. Use a self-clean cycle.
° BAKE or LOCK may flash rapidly in the display to alert you if there is an error
or a problem, if BAKE or LOCK appear in the display, press CANCEL pad.
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized servicer.
, If the oven is heavily soiled, excessive flareups may result in a fault code during
cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out
excess soil, then reset the clean cy'cie. If the fault code reappears, contact an
authorized servicer.
° The oven makes several low level noises. You may hear the oven relays as they go on
and off. This is normal
, As the oven heats and cools, you may hear sounds of metal parts expanding and
contracting. This is normal and wiii not damage your appliance.
° Oven may be in Sabbath Mode. See page 15.
° Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five
seconds.
26

Advertisement

Table of Contents
loading

Table of Contents