Maytag MER5875RAF - Frost 30 Inch Electric Range Use And Care Manual page 12

Precision touch control 800 electric smoothtop
Hide thumbs Also See for MER5875RAF - Frost 30 Inch Electric Range:
Table of Contents

Advertisement

Available languages

Available languages

3. Press Convect Bake pad again or wait four seconds.
, BAKE will stop flashing.
, 1O0 ° or the actual oven temperature if over 1O0° F will
dispDy. It will rise in 5° increments untiHthe preset
temperature is reached.
, The fan icon will start to rotate.
(_)
4. AHow the oven to preheat for 8-15 minutes.
, When the set oven temperature is reached, one Hong
beep will sound.
, The set temperature will dispDy.
, To recall the set temperature during preheat, press the
Convect Bake pad.
5. PDce food in the oven.
8. Check cooking progress at the minimum cooking time.
Cook Hongerif needed.
7. When cooking is finished, press CANCEL pad. (_ANC_
8. Remove food from the oven.
2. Enter the roasting time using the number pads.
° Time can be set from 10 minutes (00:10) to 11 hours,
59 minutes (11:59:).
, Press Oonvect Boast pad again or wait 4 seconds.
° ROAST and the fan icon will flash in the display.
° 000 will flash in the display.
Select the oven temperature. Press the
[/
3.
Autoset 0 pad for 325° F or the
_,utoset
appropriate number pads.
° Each additional press of the Autoset 0 pad will increase
the temperature by 25°
° The oven temperature can be set from 170° to 550°
4. Press Convect Boast pad again or wait four seconds.
° ROAST will stop flashing and light in the display.
, 100° or the actual oven temperature will display. It will
rise in 5° increments until the preset temperature is
reached.
° The fan icon will start to rotate.
Roasting
With
Convection
When convection
roasting, enter your maximum
conventional
roasting time and temperature°
The control
will automatically prompt you to check the food for aloneness
at 75% of the set time.
Roasting
Notes:
° When convection roasting, the cooking time must be set
before setting the temperature.
° If your recipe requires a preheated oven, add 15 minutes
to the cooking time programmed.
, Roasting times can vary with different cuts of meat.
, It is not necessary to preheat when convect roasting
large cuts of meat.
° Refer to "Cooking Made Simple" booklet for suggested
roasting temperatures and times.
To set Convect
Roast:
1. Press the Convect Boast pad.
° ROAST and the fan icon will flash
° 00:00 will flash in the display.
° 000 lights in the display.
_otes:
, If a preheat is required, allow the oven to preheat for 8-15
minutes.
° When the set oven temperature is reached, one long beep
will sound.
5. Place food in the oven.
, Time will start counting down once oven starts heating
up.
, To recall the set temperature during preheat, press the
Convect Roast pad.
8. When 75% of the set cooking time has elapsed, the oven
light will turn on and FOOD will flash in the display. Check
the cooking progress at this time. Cook longer if needed.
, The oven light will remain on until the Oven Light pad is
pressed.
, Press any pad to recall the cook time remaining. __
7. When cooking is finished, press CANCEL pad. {/CANCE_
8. Remove food from the oven.
11

Advertisement

Table of Contents
loading

Table of Contents