Removing The Wireless Lan Module - Clevo W110ER Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 10
Wireless LAN
1. Turn off the computer, remove the battery
Module Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect cables
a. Locate the wireless LAN
4. The Wireless LAN module
module.
5. Lift the Wireless LAN module
b. Disconnect the cables
and remove the screw.
a.
c. The WLAN module will
pop up.
d. Lift the WLAN module
out.
Note: Make sure you
reconnect the antenna
cable to ''1'' +
''2''socket (Figure
b).
b.

5. WLAN Module.
• 1 Screw
2 - 14 Removing the Wireless LAN Module
(page 2 -
& , then remove screw
2 3
(Figure 10c) will pop-up.
5
(Figure 10d) up and off the computer.
5
1
2
3
4
5) and the component bay cover
(Figure 10a ) on the mainboard.
1
from the module socket
4
c.
5
d.
5
.
(page 2 - 6)
(Figure 10b ) .