Removing The Keyboard - Clevo W110ER Service Manual

Removing the Keyboard

1. Turn off the computer and remove the battery
2. Use only the small tool provided (see picture below) to carefully press the four keyboard latches
A
top of the keyboard to elevate the keyboard from its normal position
3. Carefully lift the keyboard
5
4. Disconnect the keyboard ribbon cable
5. Carefully lift up the keyboard
a.
1 2 3
b.
6
7
(page 2 - 5).
up, being careful not to bend the keyboard ribbon cable
from the locking collar socket
6
(Figure 11c) off the computer.
5
4
Tool for pressing
the keyboard
latches.
A
5
7
1
(Figure 11a).
(Figure 11b).
6
(Figure 11b)
7
c.
5
d.
Keyboard Tabs
Disassembly
Figure 11
Keyboard Removal
- at the
4
a. Press the four latches to
release the keyboard.
b. Lift the keyboard up and
disconnect the cable
from the locking collar.
c. Remove the keyboard.

Re-Inserting the Key-
board
When re-inserting the
keyboard, align first
the three keyboard
tabs (Figure 11d) that
are located at the bot-
tom, to the slots in the
case.

5. Keyboard
Removing the Keyboard 2 - 15