Avid Technology Artist Control User Manual page 44

Select Repeat to repeat the command if the Soft Key is held down. For example, if the key executes a Nudge command and Repeat
is selected, holding down the Soft Key will continue to Nudge.
Click Delete to delete the selected command.
EUCON
The EUCON command types under the Details column are specific to each application. Each application supports many EUCON
commands. Browse them to determine the most useful commands for your projects. Consult the application's documentation for
specific questions about the commands. Non-EUCON-aware applications that do not support HUI or Mackie Control do not have
EUCON commands.
The width of the three right columns can be changed by clicking and dragging at the bottom of the scroll area.
Page
The Page command configures a Soft Key to jump to a specific Soft Key page. Select Touchscreen or Surface from the Section
menu, and then select Next Page, Previous Page, or Jump to Page from the Action menu. The Page field, active only when Jump to
Page is selected, specifies the Page number.
Jump to Page dialog configured to jump to page 1 of the Surface Soft Keys
MC
The primary function of the MC command type is to recall a Layout (see "Layouts" on page 36). Select Recall Layout from the Ac-
tion menu and select the Layout number from the Layout menu. The other commands are for compatibility with MC Pro and are
not used with Artist Control.
Recall Layout command
40 Artist Control User Guide