Surfaces - Avid Technology Artist Control User Manual

Surfaces

The Surfaces tab shows all Artist Series media controllers on your network and those connected to your instance of EuControl.
Surfaces tab
Control Unit Banks Independently
This option is only available when an Artist Control is selected in the My Surfaces list. When enabled, each Artist Series unit can
bank independently of each other. In applications that support it, this lets you configure one unit for dedicated control of output
busses, for example.
All Surfaces
All Surfaces shows all Artist media controllers on the network. A device shown in light gray is already connected either to your
own or another instance of EuControl running on a different workstation. In both cases, it is not selectable.
My Surfaces
My Surfaces shows the Artist media controllers connected to your instance of EuControl. There can be one Artist Control, one
Artist Transport, and up to four Artist Mixes in the My Surfaces list, linked into a single large surface.
The top-to-bottom order corresponds to the left-to-right order of the surfaces, respectively. The left-most surface has fader
number 1. Use the up and down buttons (to the right of the My Surfaces list) to reorder the list.
Each Artist Series controller can be renamed by double-clicking the existing name and typing a new name.
Add
Click Add to add the selected All Surfaces entry to My Surfaces. This connects this Artist Series controller to your instance of
EuControl. You can also click and drag an Artist media controller from All Surfaces to My Surfaces.
Add is disabled if all Artist media controllers in All Surfaces are connected to any instance of EuControl.
Remove
Click Remove to remove the selected surface from My Surfaces and make it available to other instances of EuControl.
Remove is disabled if no surface is selected.
30 Artist Control User Guide