Navigation Controls - Avid Technology Artist Control User Manual

SOLO
The SOLO key lights red when that strip's track is soloed and is unlit otherwise.
SEL
Pressing a fader SEL key selects that track in the application and focusses it on Artist Control. The SEL key lights yellow when the
track is selected and is unlit otherwise. All knob functions operate on the focussed track.
Some applications allow selecting multiple tracks if the Shift key on the QWERTY keyboard is held down while selecting tracks.
In this case, the attentioned track is the one whose SEL key was most recently pressed.
ASSIGN
Press the ASSIGN key to display the Assign tab in the EuControl Settings dialog (see "Assign" on page 35).
REC
Press the REC key to enable recording on a track. The REC key lights red to indicate that track is enabled (armed) for recording.
Press the REC key to cancel a track enabled for recording.
Some applications blink the REC LED when armed but not recording and light solid when recording.
AUTO
To change the automation mode on a track, press the AUTO key until the desired automation mode displays on the Touchscreen.

Navigation Controls

Scroll through tracks using the BANK and NUDGE keys. HOME and END are shortcuts to the first and last banks, respectively.
CFG CFG
PAGE PAGE
MIXER CLOSE
NUDGE NUDGE
HOME END
BANK BANK
Fader navigation controls
BANK and NUDGE
The BANK and NUDGE keys change which tracks are assigned to the strips. The four strips can be thought of as a window that
moves in the direction indicated by the arrow over the tracks in the application.
Chapter 4: Surface Controls 17