Assign - Avid Technology Artist Control User Manual

Footswitch
Artist Control lets you connect a footswitch for hands-free punch in and out. Connect a footswitch to the 1/4-inch FOOTSWITCH
input on the back panel.
To configure the Footswitch in EuControl:
In the Footswitch section of the Preferences tab, click to select the desired Punch In and Punch Out assignments:

Record | Record When the application is rolling, pressing the footswitch once punches into recording on record enabled tracks.
Pressing the footswitch again takes the track(s) out of record but does not stop the transport.
Record | Play Pressing the footswitch once punches into recording on record enabled tracks. Pressing the footswitch again stops
the record pass (your DAW may or may not automatically take the track out of record on stop; see the documentation for your
application).
Status Shows whether the footswitch state is currently on or off.
Shift + Fader Sets Level to 0dB
When enabled, holding SHIFT and touching a fader sets the fader to 0dB. SHIFT-lock does not apply (SHIFT must be pressed).

Assign

This tab manages how tracks are assigned to strips on the Artist Control or Artist Mix. By default, tracks are automatically assigned
in banks of four.
Assign tab
Display Application's Track Numbers
Enabling this checkbox lets EuControl display track numbers as assigned by the currently selected (in focus) application, if that
application supports track numbers.
Clear All Assignments
Clears all currently displayed assignments.
Chapter 6: EuControl 35