Avid Technology Artist Control User Manual page 14

If you did not see the lit EuControl icon, do the following:
12
• See "Surfaces" on page 30 and add the Artist Control manually.
• Shut down the Artist Control and your computer, then turn them on (computer first, then Artist Control).
• If your Mac is pre-2002 and you are using an Ethernet router or switch, you need to purchase a normal straight-through
Ethernet cable (instead of the crossover Ethernet cable supplied) from a computer store.
• See www.avid.com/artist/support for the most current troubleshooting information.
If you downloaded the latest software from the web, you may need to update the firmware on your Artist Series controllers.
13
See "Update Firmware" on page 31 for instructions.
Launch your application (such as Pro Tools, Logic Pro, Cubase, or Digital Performer) and open a session or project.
14
To set up your application to work with Artist Control, see the EUCON Application Setup Guide that you downloaded at the be-
15
ginning of this section.
Controlling a Second Workstation
Artist Control can control applications running on a second computer, referred to in this guide as a workstation. Most users will
not need to do this because EuControl will be running on the same workstation as the their audio/video applications.
To be able to control a second workstation:
Do one of the following:
1
• Download the EuControl installer from www.avid.com/artistsupport onto the second computer. After downloading, make
sure the installer is uncompressed (.dmg on Mac or .ZIP on Windows).
– or –
• Insert the Installer disc into the second computer.
In the Extras folder, double-click the Install EUCON Workstation installer.
2
Follow the instructions to install the EUCON software.
3
Connecting a Footswitch
The Artist Control has a ¼-in FOOTSWITCH input on the rear panel. The footswitch can be used to punch in and out of record-
ing. Plug the footswitch in before powering on the Artist Control. See "Footswitch" on page 35 for details.
FOOTSWITCH input on rear panel
10 Artist Control User Guide