Knob Functions
Each knob has the following controls:
• Touching the knob's image on the Touchscreen toggles the state of its primary parameter, such as EQ Band 1 on or off. When
on, a small green LED lights on the lower left.
• Pressing the SHIFT key and touching the knob's image on the Touchscreen toggles its secondary parameter (if it exists), such
as toggling an aux send between pre- and post-fader. This can also change the knob function between two or more param-
eters, such as EQ Frequency and Q. When active, a small yellow LED lights on the upper left.
Knob Set Navigation Keys
Since a knob set may have more parameters than knobs, the < PAGE > keys scroll among them.
CFG
PAGE
Knob Set navigation keys
<PAGE
Press the <PAGE key to scroll to the previous page. When on the first page, pressing <PAGE key does nothing. The <PAGE key
lights yellow when there is a previous page to go to.
PAGE>
Press the PAGE> key to scroll to the next page. When on the last page, pressing the PAGE> key does nothing. The PAGE> key lights
yellow when there is a next page to go to.
Configuration Pages (CFG)
Many knob sets have a configuration page to set up that knob set. The configuration page for the Inserts knob set, for example,
is used to assign plug-ins to a track. The configuration page for the Aux knob set assigns aux sends to a track. Some applications
use the configuration page to recall plug-ins and EQs.
Press the <PAGE and PAGE> keys simultaneously to display a knob set's configuration page, if it has one. When on the configu-
ration page, both the <PAGE> keys light.
BACK
Press the BACK key once to return to the previous knob set. Press the BACK key repeatedly to back out of all sub-menus and dis-
play the top level knob set.
TOP
Press the TOP key to immediately back out of all sub-menus and display the top level knob set. This is equivalent to pressing the
BACK key repeatedly.
20
Artist Control User Guide
CFG
PAGE