Windows 98; Setup For Windows; Before You Begin Installation; Setup Procedure - 3Com Megahertz 10 User Manual

2

Before You Begin Installation

Before installing the network driver software, obtain the
following information from your MIS department:

Setup Procedure

1 Install the card as described in Chapter 1.
Windows 98 automatically detects the card, displays a New
Hardware Found dialog box, and looks for information
about the card.
2 When ready to configure the new hardware,
Windows 98 opens the Add New Hardware Wizard.
Select Search for the best driver for your device and
click Next.
3 Select Floppy Drives, insert the LAN card Installation
Disk, and click Next.
4 After finding the files on the disk, the hardware
wizard displays the card name, FE574B-3Com 10/100
LAN PCCard-Fast Ethernet. Click Next to copy the
required files.
S
ETUP FOR
For Windows 98 networking, your computer name and
workgroup name.
For your network account, your user name and password.
W
INDOWS
98