Setup For Windows Nt; Before You Begin Installation; Setup Procedure; Setup With No Networking Installed - 3Com Megahertz 10 User Manual

4

Before You Begin Installation

Which Windows NT setup procedure you use depends on
whether networking has already been installed on your
computer. Verify with your MIS department which network
driver installation instructions you should use.
Before setting up the card, you will need to know:

Setup Procedure

Setup With No Networking Installed

1 In the Control Panel, double-click Network.
2 When the system prompts: "Windows NT Networking
is not installed. Do you want to install it now?", click
Yes. This opens the Network Setup Wizard.
3 Check Wired to the network and click Next.
4 When the system prompts to have setup start
searching for a network adapter, click Select from
List.
5 Click Have Disk. Put the Installation Disk in the floppy
drive and click OK.
S
ETUP FOR
Your network file server name, network account user
name, and password.
The Protocol used in the Microsoft Windows network
(NWLink IPX/SPX compatible transport, TCP/IP protocol,
NetBEUI protocol).
The Name of the NT Server domain or workgroup to
which you belong.
Your IP address (unless you are using DHCP).
W
INDOWS
NT