Lan Card Leds - 3Com Megahertz 10 User Manual

4 C
HAPTER

LAN Card LEDs

Once the card is connected to the network and the
network drivers are installed (described in the following
chapters) you will be able to use the connector LEDs to
verify link integrity.
Table 1 LAN Connector LEDs
LED On
10 Mbps Good 10BASE-T
connection between
PC Card and hub
100 Mbps Good 100BASE-TX
connection between
PC Card and hub
1: I PC C
NSTALLING THE
Off
No connection.
(Off when 100 LNK
LED is on.)
No connection.
(Off when 10 LNK
LED is on.)
ARD
Flashing
There may be a
problem with your
physical connection.
Check that all cables
are connected
securely.