Table of Contents
Advertisement
2. Use the adhesive on the coin-cell battery and adhere it to the system board.
3. Connect the coin-cell battery cable to the connector on the system board.
4. Replace the palm rest assembly (see
5. Replace the keyboard (see
6. Replace the hinge cover (see
7. Replace the memory module(s) (see
8. Follow the instructions from
9. Replace the battery pack (see
10. Replace the base cover (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Replacing the Palm Rest
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing the Memory
Module(s)).
step 6
to
step 8
in
Replacing the Hard
Replacing the Battery
Pack).
Replacing the Base
Cover).
Assembly).
Drive.
Advertisement
Table of Contents
