Table of Contents
Advertisement
13. Remove the four screws that secure the display assembly to the computer base.
1
screws (4)
2
14. Gently slide the Mini-Card antenna cables out through the slot on the computer base.
1
Mini-Card antenna cables
15. Lift the display assembly off the computer.
Replacing the Display Assembly
1. Follow the instructions in
Before You
2. Slide the antenna cables in through the slot on the computer base.
3. Place the display assembly in position and replace the four screws that secure the display assembly to the computer base.
4. Connect the display cable to the connector on the system board.
5. Turn the computer over and route the Mini-Card antenna cables through the routing guides on the computer base.
6. Connect the Mini-Card antenna cables to the Mini-Card(s).
7. Replace the palm rest assembly (see
8. Replace the keyboard (see
9. Replace the hinge cover (see
10. Replace the memory module(s) (see
11. Follow the instructions from
display cable connector
Begin.
Replacing the Palm Rest
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing the Memory
Module(s)).
step 6
to
step 8
in
Replacing the Hard
Assembly).
Drive.
Advertisement
Table of Contents
