Paper Cutting Failed; End Of Paper Feed - Canon iPF650 - imagePROGRAF Color Inkjet Printer User Manual

Messages regarding paper

Paper cutting failed.

There are sheets left on the Ejection Guide.
There is a foreign object by the Output Tray,
obstructing the Cutter Unit.
You are not using the printer under the recommended
environmental conditions for the paper.
You are using paper that is not compatible with
automatic cutting.
In other cases, the Cutter Unit may be damaged.

End of paper feed.

You are pressing the ▲ button on the Control Panel
and trying to rewind the roll to the edge.
700 Error Message
Cause
Cause
Corrective Action
1.
Push the Release Lever back and remove the
paper.
2.
Load the paper.
3.
Pull the Release Lever forward.
4.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→P.106)
1.
Lift the Top Cover and remove the foreign object.
2.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see Paper Reference Guide."
(→P.96)
1.
Specify Manual as the cutting method and use
scissors or a cutting tool to cut the roll.
(→P.129)
For information about paper that is compatible
with automatic cutting, see the Paper Reference
Guide.
(→P.96)
2.
Push the Release Lever back and remove the
paper.
Contact your Canon dealer for assistance.
Corrective Action
Release the ▲ button.