Paper Not Aligned With Right Guide; Cannot Detect Papr; Leading Edge Detection Error; Paper Cutting Failed - Canon iPF685 Series Basic Manual

Paper not aligned with right guide.

Paper not aligned with right guide.
Paper not aligned with right guide.
When paper was loaded, it was not aligned with the guide on the right
side.

Cannot detect papr

Cannot detect papr
Cause
The printer could not detect the paper.

Leading edge detection error.

Leading edge detection error.
The leading edge of the paper cannot be detected.

Paper cutting failed.

Paper cutting failed.
Cause
There are sheets left on
the Ejection Guide.
There is a foreign object
by the Output Tray, ob-
structing the Cutter Unit.
You are not using the
printer under the recom-
mended environmental
conditions for the paper.
You are using paper that
is not compatible with au-
tomatic cutting.
118
Cause
Reload the paper as follows.
1. Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Printer.")
(See "Loading Rolls in the Printer.")
Cause
1. Push the Release Lever back and remove the paper.
2.
Load the paper.
3.
Pull the Release Lever forward.
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
1.
Lift the Top Cover and remove the foreign object.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper are met. Note
that various environmental conditions are recommended for various types of paper. For details on the
recommended environmental conditions for paper, see Paper Reference Guide."
(See "Displaying the Paper Reference Guide.")
1.
Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Paper Reference
Guide.
(See "Displaying the Paper Reference Guide.")
2.
Push the Release Lever back and remove the paper.
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
Corrective Action
➔
Corrective Action
Follow these step to reload a sheet.
1. Push the Release Lever back.
2.
Reload the sheet straight, in the correct position.
(See "Loading Sheets in the Printer.")
Corrective Action
P.15
➔
User's Guide
➔
➔
➔
Corrective Action
P.21
➔
P.15
P.21
➔
User's Guide
User's Guide
iPF685 Series
Basic Guide