Paper Size Not Detected - Canon iPF650 - imagePROGRAF Color Inkjet Printer User Manual

Paper size not detected.

Paper has been loaded askew, or warped paper has
been loaded.
Because the Platen is soiled with ink or other
substances, the size of the clear lm cannot be
detected.
Cause Corrective Action
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it parallel
to the orange Paper Alignment Line.
3.
Pull the Release Lever forward.
4.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→P.106)
If this error recurs after you reload the roll, remove
the Roll Holder from the printer, push the roll rmly in
until it touches the Roll Holder ange, and reload the
Roll Holder in the printer.
(→P.103)
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Load the sheet, aligning it with the guide on the
right.
3.
Pull the Release Lever forward.
4.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→P.136)
Open the Top Cover and clean the entire Platen.
(→P.647)
Messages regarding paper
Error Message 693