Setting Item
GL2
Line
Pen
Settings
& Pen
Setup
Manager
Smoothing
ThickenFineLines
AdjustFaintLines
Process-
Warning
ing
Option
PageSizeProcess1
Dene Palette
Specify the Width, Color, and Line Attributes in
the palette Pen no.. Choose Factory to conrm the
values when Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle
Setting as the processing for the ends and junctions
of lines.
•
•
Reset Palette
Restore Dene Palette to the default palette settings.
Choose whether to print arcs as smooth curved lines
or as multiple connected line segments.
•
•
Select On to print ne lines more distinctly.
If ne lines are printed in colors that do not match
the colors of other shapes, selecting Off may help
produce the expected results. However, lines in some
colors may appear broken.
Select On to have any GL2-related warnings
displayed.
Normally, the area available for printing excludes
a margin required by the printer, and images are
positioned accordingly. Selecting On in this setting
eliminates any misalignment of the printing position if
the image itself includes a border.
Description, Instructions
If you choose No Setting
If you choose Circle Setting
If you choose Software
Operation is determined by the application. If
nothing is specied by the application, the result is
as shown in the gure.
Note: By default, this is a 72-sided gure
If you choose Smooth
Control Panel
Printer Parts 55