Canon iPF650 - imagePROGRAF Color Inkjet Printer User Manual page 74

Control Panel
System Keep Paper Size
Setup
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Use RemoteUI
Reset PaprSetngs
Prep.MovePrinter
Admin. Change Password
Menu
58 Printer Parts
Setting Item Description, Instructions
Choose Off to give priority to margin settings. The
larger value is used if the margin specied in the
printer driver does not match the margin in the printer
menu
Specify whether to trim the leading edge of the
currently retracted roll when the roll is advanced. Cut
the edge if you are concerned about any marks left
on the roll when the roll is left in the retracted position.
Specify On to have rolls cut when printing begins after
Sleep mode or when the power is restored. Selecting
Automatic will trim the edge when the roll has been
in the retracted position for two days or more.
Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead.
(→P.604)
In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose 1 page to check
once per page.
Select Warning > On to display warnings if the
nozzles clog during printing.
Choosing Off prohibits access from RemoteUI.
Settings can only be congured from the control
panel.
Restores settings that you have changed with Media
Conguration Tool to the default values.
Select this option when transferring the printer to
another location. Follow the instructions displayed to
complete the required procedure.
(→P.651)
Not displayed during a warning message that the
remaining Maintenance Cartridge capacity is low.
By setting a password, you can restrict menu display
and conguration as follows. You can input between
0 and 9999999.
•
Viewing and conguration by administrators only
IPv4 Settings
Change Password
Init.Admin.Pswd