Images Are Printed Crooked; Documents Are Printed In Monochrome - Canon iPF650 - imagePROGRAF Color Inkjet Printer User Manual

The length of printed images is inaccurate in the feeding
direction
In the Control Panel menu, Adj. Priority is set to
Print Quality.
The type of paper specied in the printer driver does
not match the type loaded in the printer.

Images are printed crooked

In the Control Panel menu, Skew Check Lv. is set to
Loose or Off.
In the Control Panel menu, Width Detection is set
to Off.

Documents are printed in monochrome

In the Advanced Settings of the printer driver,
Monochrome, Monochrome (BK ink), or
Monochrome Bitmap is specied in Color Mode.
The Printhead nozzles are clogged.
Cause
Cause
Cause
Problems with the printing quality
Corrective Action
Set Adj. Priority to Print Length in the Control
Panel menu, and then execute Adjust Length.
(→P.612)
Load paper of the same type as you have specied
in the printer driver.
(→P.106)
(→P.136)
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and
try printing again.
Corrective Action
In the Control Panel menu, set Skew Check Lv. to
Standard.
Set Width Detection to On in the Control Panel
menu.
Corrective Action
In the Advanced Settings of the printer driver,
specify Color in Color Mode and try printing again.
Print a test pattern to check the color ink nozzles and
see if they are clogged.
(→P.630)
Troubleshooting 677