Before Operating The Forklift - Genie GTH-1048 Operator's Manual

CAUTION
If any gauge reading does not fall within the set tolerances the
machine must be repaired before operation.
Check the dash mounted gauges for logical readings.
(1) Fuel
(2) Transmission Oil Temp.
(3) Transmission Oil PSI.
(4) Volt
(5) Engine Water Temp.
(6) Engine Oil PSI
Operate the joystick controller momentarily in all directions.
OPERATION

BEFORE OPERATING THE FORKLIFT

1/2 to Full
180 F to 200 F
240 to 280 PSI
12 to 14
180 F to 200 F
40 to 80 PSI
BRAKE ON
PUMP OFF
HEADLIGHT
STANDARD JOYSTICK FUNCTIONS
BUTTON DEPRESSED FUNCTIONS
4 - 7
1 2 3
6 4
5
SWAY
CONTROL
AUXILIARY LEFT RIGHT
HEATER WIPER
HYDRAULICS STABILIZER STABILIZER
A - Boom Down
B - Boom Up
C - Boom Out
D - Boom In
E - Boom Down and Out
F - Boom Up and In
G - Boom Up and Out
H - Boom Down and In
A - Tilt Forward
B - Tilt Back