Genie GTH-1048 Operator's Manual page 60

MAINTENANCE PROCEDURES
CHECK HYDRAULIC OIL LEVEL
Location: Sight glass (B). Behind the rear panel.
To Check: Move the machine to level ground.
Level the frame.
Completely retract the boom.
Position the forks level.
Lower the boom to the ground.
Oil should be visible 1/2 way in the sight glass.
NOTE: Refer to page 5-24 of this manual for the proper oil
specifications and capacities.
CHECK TIRE FOR PROPER INFLATION
Location: Wheel ends.
To Check: With the valve stem (C) positioned to the top of
the tire, check the tire pressure with the tire cold
and a properly functioning air pressure gauge.
Setting: 50 PSI.
All tires require a calcium chloride ballast or an optional foam
fill to be operated safely. The loss of ballast can affect the
machine's stability and cause a rollover hazard, resulting in
damage, injury or death.
DAILY MAINTENANCE
B
5 - 6
C