Genie GTH-1048 Operator's Manual page 53

Rough terrain fork lift
Hide thumbs Also See for GTH-1048:
Table of Contents

Advertisement

OPERATION
PLACING A LOAD
GTH-1048 & GTH-1056
When placing a load with the Model GTH-1048
or the GTH-1056 the rear axle stabilizing cylinders
need to be taken into consideration. When the
boom reaches an angle of 60 DEGREES on the
GTH-1048 or 55 DEGREES on the GTH-1056, all
frame leveling and transmission functions are
disabled and the rear axle stabilizing cylinders
become locked. This DOES NOT affect any
boom or fork functions. To unlock the rear axle
stabilizing cylinders and enable the transmission
functions, lower the boom to a position less than
60 degrees on the GTH-1048 or 55 degrees on the
GTH-1056.
60° GTH-1048
,- . / ! & 0 - 1 2 34
55. / ! & 0 - 5,34
55° GTH-1056
4 - 15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gth-1056

Table of Contents