Genie AWP Super Series 114002 Operator's Manual page 26

Operator's Manual
TRANSPORT INSTRUCTIONS
Securing the Machine
Use chains or straps of ample load capacity.
Use a minimum of 2 chains.
Adjust the rigging to prevent damage to the chains.
24
Winching the Machine onto a
Flatbed Truck
1 Fully lower the platform.
2 Push in the red Emergency Stop buttons, turn
the key switch to the off position and remove
the key.
3 Remove the outriggers from the base and place
them in the storage sockets.
4 Inspect the entire machine for loose or
unsecured items.
5 Connect the cable to the winching point located
at the rear of the base.
6 Carefully winch the machine onto the truck.
7 Secure the machine base to the transport
vehicle. See Securing the Machine.
Loading the Machine With
a Crane
Use the lifting eye mounted on the rear mast
column.
The battery pack must be removed before lifting the
machine with a crane. Disconnect the battery plug
before removing the battery pack.
Be sure to inspect the machine
and remove any loose or
unsecured items.
Always place the lifting hook
through the lifting eye so that it
points away from the machine.
Genie AWP Super Series
Third Edition • Fourth Printing
Part No. 114002