Operating With Remote Control - Eiki LC-XL200A Owner's Manual

Specifications (1 page)

Owner's manual (92 pages)

Owner's manual (61 pages)

Table of Contents

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to

make the desired operation quickly without calling up the On-Screen Menu.

SHUTTER button

See pages 27, 61 for details.

IMAGE SEL . button

Press the IMAGE SEL. button on the remote control, the last

stored image will be displayed on the screen for about 4 seconds.

For its further functions, see pages 40 and 46 for details.

D .ZOOM button

Press the D.ZOOM button on the remote control to enter to the

Digital zoom +/– mode. See page 43 for details.

LENS SHIFT button

See page 27 for details.

ZOOM buttons

Press the ZOOM buttons on the remote control to zoom in and

out the image.

AUTO PC button

Press the AUTO PC button on the remote control to operate the

Auto PC adj. function. The computer screen adjustment can be

done easily by pressing this button. See page 37 for details.

SCREEN button

Press the SCREEN button on the remote control to select the

desired screen size. The selected screen size symbol appears

on the screen for 4 seconds. See pages 42 to 44 and 49 to 50

for details.

Press and hold the SCREEN button for more than 5 seconds

to return all the screen size adjustment setting to the factory

default setting.

INFO . button

Information display can be used to confirm the current operating

condition of the projector and the signal being projected through

the projector.

Press the INFO. button on the remote control to display the

information window on the screen. To hide the information window,

press the INFO. button again.

The information window can also be selected from the menu.

Note:



• The H-sync freq. and V-sync freq. values described in the

figure may be different from the actual values.

• SERIAL NO. is used to service the projector.

FOCUS buttons

Press the FOCUS buttons on the remote control to adjust focus of

the image.