Eiki LC-XL200A Owner's Manual page 44

Computer Input
Keystone
This function is used to adjust keystone distortion of the projected
image. Use the Point ▲▼ buttons to choose the item you want to
adjust.
Standard
Adjust the Horizontal/Vertical keystone distortion of the projected
image.
Corner correction
Adjust the corner distortion of the projected image.
Corner pattern
Choose a Corner pattern mode among Red, White, Blue,
and Off.
Store
Store ....... Keep the keystone correction even when the AC
power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
Press the KEYSTONE button on the remote control to switch the
Standard (for Vertical/Horizontal) /Corner correction adjustment. The
Standard or Corner correction adjustment dialog box appears. Use
the Point ▲▼◄► buttons to correct the Standard or Corner distortion
(p.31).
Ceiling
When this function is set to On, the picture will be top/bottom and
left/right reversed. This function is used to project the image from a
ceiling-mounted projector.
Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from rear of
the screen.
Reset
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at "Yes."
44
Keystone
Ceiling
Rear