Connecting To Video Equipment (Video, S-Video) - Eiki LC-XL200A Owner's Manual

Installation
Cables used for connection
• Video cable (RCA x 1 or RCA x 3)
• BNC cable (BNC x 1 or BNC x 3)
• S-video cable

• Scart-VGA cable

• DVI-Digital cable

Unplug the power cords of both the projector and external equipment from the AC
outlet before connecting cables.
Composite
Video
BNC
cable
Video
Y - Pb/Cb - Pr/Cr
20

Connecting to Video Equipment (Video, S-video)

( = Cables not supplied with this projector.)


 A cable with one end D-sub 15 and the other end (Black box) compatible with

each equipment is necessary.
Analog Out Signal Table
Input Terminal
D-sub15
Input 1
DVI-D
Input 2 5 BNC
RCA
Input 3 S-video
Video
Network
Component
Video Output Component Composite
(Y, Pb/Cb, Cr/Pr) Video Output Video
RCA
cable
Video
Y - Pb/Cb - Pr/Cr
Monitor Out
RGB (PC analog) YES
RGB (SCART) NO
RGB (PC digital) NO
RGB (AV HDCP) NO
RGB YES
Video YES
Y, Pb/Cb, Pr/Cr YES
Y, Pb/Cb, Pr/Cr YES
S-video NO
Video YES
NO
S-video
Output
Refer to the
Analog Out
Signal Table
(above).
S-video
cable
ANALOG OUT S-VIDEO
Cable




Digital Output
(HDCP
RGB Scart
compatible)
21-pin Output
Scart-VGA
cable
ANALOG IN DIGITAL IN
DVI-Digital
cable