Side Control And Indicators - Eiki LC-XL200A Owner's Manual

Part Names and Functions
Side Control
①
②
③
④
① ON/STAND-By button
Turn the projector on or off (pp.23-24).
② MENU button
Open or close the On-Screen Menu (p.25).
③ SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).
④ SHUTTER button
Close and open up the built-in shutter (p.27).
⑤ Point ▲▼◄► ( VOLUME – / + ) buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
– Adjust the volume level (with Point ◄► buttons)
(p.28).
⑥ LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.27).
⑦ INPUT button
Select an input source (pp.33-35).
⑧ POWER indicator
– Light green while the projector is in stand-by mode.
– Light green during operations.
– Blink green in the Power management mode (p.57).
12

Side Control and Indicators

⑦
⑥
⑤
Indicators (on the top panel)
⑨ LAMP indicator
Light red during operations.
⑩ WARNING TEMP . indicator
Blink red when the internal temperature of the
projector exceeds the operating range
(pp.69, 76-78).
⑪ WARNING FILTER indicator
– Blink slow when the filter is being scrolled
(pp.63, 76).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.63, 78).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time
set in the timer setting, urging immediate
filter/ filter cartridge replacement
(pp.62, 63, 78).
⑫ SHUTTER indicator
Light blue when the shutter is closed (p.76).
⑬ LAMP REPLACE indicator
Light orange when the projection lamp reaches
its end of life (pp.66, 77).
⑧
⑨
⑩
⑪
⑫
⑬