Installation; Positioning The Projector; Lens Shift Adjustment - Eiki LC-XL200A Owner's Manual

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen (for
LC-XL100A and LC-XL200A).
Note:

• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
10.9' (3.3 m)
4.3'(1.3 m)
40"
Screen Size
(W x H) mm
4:3 aspect ratio
Zoom (max.)
Zoom (min.)
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function
makes the positioning of images easy on the screen (See page 27).
When the lens is shifted to top .
The display position
can be shifted upward
up to 60% elevation of
the display.
When the lens is shifted
to leftmost .
The display
position can be
shifted to the left in
up to 10% width of
the display.

Installation

Positioning the Projector

75.1' (22.9 m)
44.3'(13.5 m)
33.2'(10.1 m)
22.0' (6.7 m)
200"
100"
118"
59"
40" 100"
610 x 457 2032 x 1524
4.3'(1.3 m)
10.9' (3.3 m)
7.4'(2.3 m)
18.7' (5.7 m)

Lens Shift Adjustment

When the lens is shifted to bottom .
The display position can
be shifted downward up
to 60% low level of the
display.
When the lens is shifted
to rightmost .
The display position
can be shifted to the
right in up to 10%
width of the display.
Max. Zoom
400"
300"
Min. Zoom
236"
177"
(Center)
200" 300"
4064 x 3048 6096 x 4572
33.2'(10.1 m) 44.3'(13.5 m)
22.1' (6.7 m)
37.6' (11.5 m)
56.5' (17.2 m) 75.1' (22.9 m)
Lens shift adjustable range
Lens shift center position
(Inch Diagonal)
400"
400"
8128 x 6096
50%
10%
Shift range
17