Table of Contents
Advertisement
Available languages
Available languages
IMPORTANT:
Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a
well-fitting
lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop or grates. Aluminum and
copper may be used as a core or base in cookware. However,
when used as a base they can leave permanent marks on the
cooktop or grates.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has
the same characteristics
as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
Use the following chart as a guide for cookware material
characteristics.
COOKWARE
CHARACTERISTICS
Aluminum
•
Heats quickly and evenly.
•
Suitable for all types of cooking.
•
Medium or heavy thickness is best for
most cooking tasks.
Cast iron
Ceramic or
Ceramic glass
•
Heats slowly and evenly.
•
Good for browning and frying.
•
Maintains heat for slow cooking.
•
Follow manufacturer's
instructions.
•
Heats slowly, but unevenly.
•
Ideal results on low to medium heat
settings.
Copper
•
Heats very quickly and evenly.
Earthenware
•
Follow manufacturer's
instructions.
•
Use on low heat settings.
Porcelain
•
See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless
steel
•
Heats quickly, but unevenly.
•
A core or base of aluminum or copper
on stainless steel provides even
heating.
ELECTRONICOVENCONTROL
A
B
C
D
E
F
_i'
ii
©@
LUZDEHORNO
RELOJ
OVEN LIGHT
CLOCK
©
TEMPORIZADOR
TIMER
iiii
i
_%
_i BAKE
_ ASAR
_ _Ro L2
K
J
/
H
G
TEMPIHORA
TEMPIHOUR
A. Oven light
G. Temp/hour
B. Clock
H. Broil
C. Bake indicator
light
I. Bake
D. Display
J. Broil indicator
light
E. Start (control lock)
K. Timer
F. Cancel/off
!i--
When power is first supplied to the appliance, a flashing time will
appear on the display. Press CANCEL/OFF to clear flashing time
from the display.
If flashing time appears, a power failure has occurred. Press
CANCEL!OFF and reset the Clock if needed.
When the oven is not in use, the display shows the time of day.
When performing a cook or timer function, the display will show
either hours and minutes, or minutes and seconds.
The indicator lights are located on both sides of the display. The
indicator lights light up or flash when the oven is in one of the
following modes: Bake, Broil or Timer.
The START pad begins any oven function. If the START pad is not
pressed within 5 seconds after pressing a function pad, the Push
to Start ("PSH") indicator light will flash and the push to start tone
will sound as a reminder.
If the START pad is not pressed within 1 minute after pressing a
function pad, the oven display will return to the time of day mode
and the programmed
function will be canceled.
The CANCEL!OFF pad stops any function except the Clock,
Timer and Control Lock.
Advertisement
Table of Contents
