Dell Broadcom NetXtreme Family of Adapters User Manual page 128

Fibre Channel Over Ethernet: Broadcom NetXtreme II Network Adapter User Guide
Prepare Broadcom Multiple Boot Agent for FCoE Boot
1. During POST, press CTRL+S at the Broadcom NetXtreme Ethernet Boot Agent banner to invoke the CCM utility.
2. Select the device through which boot is to be configured.
NOTE: IMPORTANT: When running in NIC Partitioning (NPAR) mode, FCoE boot is only supported when the first
function on each port is assigned an FCoE personality. FCoE boot is not supported when the FCoE personality is
assigned to any other function.
file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/fcoe.htm[9/26/2012 3:29:33 PM]