Yamaha YSP-3300 Owner's Manual page 67

Menu
TURN ON VOLUME
MAX VOLUME
INPUT LOCK
PANEL LOCK
R.INPUT POWER
AC ON STANDBY
MEMORY PROTECT
4)
YRB FL
4)
YRB FR
4)
YRB SL
4)
YRB SR
FW UPDATE
6)
INITIALIZE
y
4)
When a menu for the YRB settings is selected, on-screen instructions for
installing the reflection board is displayed. See documentation provided
with the YRB-100 for instructions on installing the YRB-100.
Description
Sets the volume level at power-on.
Sets the maximum volume level.
Enables/disables the INPUT key on the front panel.
Enables/disables the keys on the front panel.
Enables/disables power-on by remote control input
selector keys when the unit is in the standby mode.
Sets whether or not this unit returns to its previous
state when AC power is restored after a temporary
power loss.
Protect system memory 1/2/3 (☞p. 28).
Use the YRB-100 reflection board for the front left
channel.
Use the YRB-100 reflection board for the front right
channel.
Use the YRB-100 reflection board for the surround
left channel.
Use the YRB-100 reflection board for the surround
right channel.
Confirm firmware version/update firmware.
Resets all settings to their default values.
Selectable item/Adjustable range
OFF* (Not set), 1 to 70
1 to 99, MAX* (Maximum)
ON (Disabled), OFF* (Enabled)
ON (Disabled), OFF* (Enabled)
ON (Enables power-on), OFF* (Disables power-on)
ON* (Enters standby mode),
OFF (Restores the state before power was lost)
ON (Protect is performed),
OFF* (Protect is not performed)
YES (The reflection board is used),
NO* (The reflection board is not used)
YES (The reflection board is used),
NO* (The reflection board is not used)
YES (The reflection board is used),
NO* (The reflection board is not used)
YES (The reflection board is used),
NO* (The reflection board is not used)
02.00.04* (The firmware version is displayed)
START OK? (Firmware is updated)
OK (All settings are restored to their default values),
CANCEL* (Settings are not restored to their default
values)
y
5)
"02.00.04" is an example of firmware version display in the advanced
setup menu.
y
6)
When the unit freezed, the problem may solve by restoring to their
default values.
Advanced setup
5)
,
67
En